![]() Step 5:Īll you have to do is to stick your selfie stick through the hole so that the disk gets mounted to the base. In your case, if you are getting it printed from a proper design shop, you won't have to worry about it. Punch a hole and remove the additional design. All you have to do is to provide a design if you wish and you will get a high quality properly cut vinyl that you can stick directly to your CD.ītw, I managed to get it done manually and it looked ok-ish I am sure you will have computer printing shops and getting a CD/DVD label printed is fairly cheap and easy these days. I had to use my scissors to cut the outline. I designed a compass keeping the above view in mind. By circular I mean, there are no hard edges, cross or perpendicular lines or text that gets skewed/stretched/overlapped when the camera software tries to stitch the image. I hope you would get a better result)Ĭreate a design that is somehow circular in nature. I used MS Word's online template to design this CD label (yep, the bad printer toner though. A standard size CD with a black printed label Print a black or preferable dark colored label/sticker as we do not want our design to be see-through. The standard CD size is 120 millimeters (4.7 inch diameter) A standard CD So, here's an old school like step-by-step guide: Infact, its just like those school projects we used to have during 6th grades. Also, based on numerous tests, I recommend to keep your design marketing/text free and as simple as possible. You don't want to put up anything which violates the terms. Do keep it in mind the Google's policy on fixing nadir (I recommend to check post on fixing Nadir which will help you understand the manual process as well as hints about Google's policy on Nadir Patching). You can design anything using MS Word, Photoshop or any other online services and it is mostly for free. All we need is an extendable selfie stick with 1/4 camera mount) - Cost up to $USD 20 Standard Extendable Selfie Stick (Here's one affordable selfie stick on Amazon.Experimented with different sizes and the best result is presented in this post) Diameter of the base disc (mounted at the base, that helps to patch nadir.Height of the rod/stick (measured from shoulders up).However, two key factors help to stitch image properly and patch nadir completely Though the rig is fairly simple and there's no maths or science behind it. Primary Function: Help remove hands, head, body and other objects from 360 photos/videos nadir Usage: any 1/4 inch screw mount capable device ![]() I am in no way affiliated directly/indirectly to these services/products ![]() Please note that links to products/services in this post are provided only to give you a starting point. I would also like to mention that this DIY rig was made after looking at the specs and design of great post on " Making a 360-degree camera mounted helmet". However, this DIY rig is primarily helpful for your 360 cameras as it will help to automatically remove you out of the frame. The rig can be used for any camera/camcorder as it is built using the standard 1/4 screw mounts. This is going to be a very simple How-To post to construct a cheap and affordable DIY handheld rig for your 360 cameras. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |